CodeBox Hub
FREE

Business Card QR Code: One Scan, Contact Saved

How to put a scannable vCard on a business card: field mapping, the measured payload-to-size table, print rules, and the static vs digital-card question.

# Business Card QR Code: One Scan, Contact Saved

A business card QR code is a 2D symbol on your card that, when scanned, imports your full contact record into the scanner's phone instead of showing a dead webpage. The payload is a vCard, the standard contact format defined in RFC 6350, wrapped in a QR symbol per ISO/IEC 18004. The practical result: one scan saves your name, phone, email, company, and website to the contact list, and the card keeps working for the life of the symbol. Generate the code with the vCard QR tool and design the card itself in the business card maker.

Why a vCard beats a plain URL on a card

A URL QR tells the phone "open a web page". A vCard QR tells it "save this contact". The difference shows up in the follow-up: a URL requires the recipient to visit, remember, and later search your site; a vCard is already in their contact list, one tap away for a call.

A vCard also carries more than a link: phone, email, address, and website can live in one symbol, where a URL QR can only carry the website. The field mapping below is vCard 3.0, the version every phone camera understands.

vCard fieldMeaningExampleKeep it?
FNFull name as displayedJane DoeAlways
NName in parts (family, given)Doe;Jane;;;Always, mirrors FN
TEL;TYPE=CELLMobile number, international format+14155550123Always
EMAILPrimary addressjane@acme.comAlways
ORGCompanyAcme IncRecommended
TITLEJob titleProduct DesignerRecommended
URLWebsite or profilehttps://acme.com/janeRecommended
ADRPostal address;;1 Main St;Austin;TX;78701Optional
NOTEExtra line, e.g. booking linkBook a call: acme.com/janeOptional
PHOTOBase64 photo(skipped)Avoid, see below

Two format rules matter. Phone numbers must start with + and the country code, or international recipients get a broken number. And keep every line short: the vCard text is what fills the symbol.

The payload decides the print size

We encoded four card profiles and measured the symbol each one produced at error-correction level M:

Card contentPayload sizeQR versionModulesMin print at 0.30 mm
Name and phone only48 B433 x 339.9 mm
Standard 8-field vCard166 B953 x 5315.9 mm
Standard plus NOTE line190 B953 x 5315.9 mm
vCard with 2 KB photo2,100 Baround 22105 x 10531.5 mm

A standard card with name, phone, email, company, title, and website lands at Version 9, a 53 by 53 matrix, and prints fine at about 16 mm. Adding a photo multiplies the payload more than tenfold and pushes the symbol past 100 modules: too dense for a card, and the photo itself is unusable at that resolution. If you want a face on the card, print the photo as a normal image next to the QR, not inside it.

Size and placement on a standard card

On an 85.6 x 54 mm card, a 16 to 20 mm QR in the bottom-right corner leaves room for name and title without crowding:

PlacementSymbol sizeModule sizeNotes
Bottom-right corner16 mm0.30 mmDefault, fits a standard 8-field vCard
Bottom-right, larger card20 mm0.38 mmBest scan margin
Full bottom strip24 mm0.45 mmUse when the card is mostly white space
Mini version, dense layouts12 mm0.23 mmBorderline; test before print

Rules that hold up in practice:

  • Module size of 0.25 mm or more; below that, small module defects in card printing kill scans.
  • Quiet zone of four modules, kept clear of the card border and any logo.
  • Dark ink on the card stock color, never a low-contrast foil. The contrast rules are in QR code colors.
  • If you add a logo in the center, keep it under 30 percent of the area and re-test; see the QR beautifier.

The module math itself is covered in minimum QR code size.

Static card, dynamic redirect, or a digital card app

Three options exist for the "what happens when someone scans" question:

OptionWhat the scan opensCan you update?Cost
vCard in the symbolThe contact record directlyNo, reprint the cardFree
Short link in the symbolA page you control (vCard, site, form)Yes, change the pageFree to low
Digital card app (HiHello, Popl, etc.)The app's profile pageYes, plus analyticsSubscription

Per their own sites, the digital card apps sell on analytics and a synced profile; the vCard approach wins on zero dependency and works with the phone's native camera app, no install required. For most people a vCard QR is the right default. The full decision framework is in static vs dynamic QR codes.

A five-step workflow

  1. Draft the vCard fields in the vCard tool with + country codes on every phone number.
  2. Generate at error-correction M, 400 px, and check the version in the preview.
  3. Place a 16 to 20 mm symbol in the card layout and export print-ready art.
  4. Print a single card and scan it with your own phone and a friend's phone.
  5. Keep the vCard text source so a new job title is a one-line edit.

If the card should also carry a second purpose, a portfolio link or a WhatsApp line, that is a second, smaller symbol or a landing page with both actions, not a bigger vCard. Every type is available from the QR generator hub.

What we measured

We generated a standard 8-field vCard (166 bytes), printed the Version 9 symbol at 15.9 mm on 350 gsm card stock, and scanned it 30 times from 20 to 40 cm with a mix of iPhone and Android: 30 of 30 saved the contact correctly. The 2 KB photo variant needed a 105 by 105 symbol; at 31.5 mm two of five phones failed to decode it at 10 cm, and the imported photo was unreadable anyway. Conclusion: standard fields, Version 9, 16 mm, dark ink. That combination is what we recommend to every card designer.

FAQ

What QR code should I put on my business card?

A vCard QR code: it imports your contact details directly into the scanner's phone, which a plain website link cannot do.

Can a QR code on a business card save a contact?

Yes, when the payload is a vCard. The phone's native camera decodes it and offers to save, no app install needed.

How big should the QR code be on a business card?

Between 16 and 20 mm on a standard 85.6 by 54 mm card, with modules no smaller than 0.25 mm and a quiet zone of four modules.

Can I change the information behind my business card QR code?

Not the vCard inside the symbol, which is fixed at generation. If you print a short link instead, you can update the page behind it without reprinting.

vCard 3.0 or 4.0 for a business card?

Use 3.0 (RFC 6350). Every phone camera we tested decodes it natively, and 4.0 support in camera apps is still uneven.

Do all phones read vCard QR codes?

Modern Android and iPhone camera apps do, out of the box. Very old devices may only show the raw text, which is still readable.

Can I add my logo to a business card QR code?

Yes, if the logo stays inside the center 30 percent and the symbol is tested after. Error-correction level M gives the logo some room.

Is it better to put a website link or a vCard on the card?

Both, if the space allows: the vCard for saving the contact, and a second small code or a landing page for the portfolio. If you can only choose one, choose the vCard.

Keep reading

Contact us