Published Oct 27, 2026
# ITF-14 Barcode: The 14-Digit Case Code
ITF-14 is the Interleaved 2 of 5 symbology carrying a 14-digit GS1 GTIN-14 — a product number that identifies the case, not the item inside. The 14 digits consist of a leading 0, a GS1 company prefix plus item reference, and a mod-10 check digit. According to GS1, a GTIN-14 identifies a trade item at distribution level, and ITF-14 is its standard linear encoding, governed by the GS1 General Specifications and ISO/IEC 16390.
Anatomy of a GTIN-14
| Position | Role | Example |
|---|---|---|
| Digit 1 | Always 0 (marks it as a GTIN-14, not an EAN-13) | 0 |
| Digits 2-13 | GS1 company prefix + item reference | 012345678901 |
| Digit 14 | Check digit (mod-10, computed from digits 1-13) | 2 |
The company prefix is variable length (typically 4 to 8 digits depending on your GS1 assignment), so the item-reference portion absorbs the difference. The digits above are a made-up example — real prefixes come from your GS1 membership. A GTIN-14 can be derived from an item code in either direction: pad a 12-digit UPC-A with a leading 0, or pad a 13-digit EAN-13 with a leading 0 — then recompute the mod-10 check over the full 13 data digits, because the old check digit does not survive the padding.
The Check Digit, Step by Step
Using the 13 data digits 0012345678901:
| Digit | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Weight | 3 | 1 | 3 | 1 | 3 | 1 | 3 | 1 | 3 | 1 | 3 | 1 | 3 |
| Product | 0 | 0 | 3 | 2 | 9 | 4 | 15 | 6 | 21 | 8 | 27 | 0 | 3 |
Sum = 98. 98 mod 10 = 8, so the check digit is (10 - 8) mod 10 = 2. The full GTIN-14 is 00123456789012, and it is printed both as the ITF-14 bars and as the human-readable 14 digits above them.
How a Case Code Relates to the Item Code
The same physical product carries different numbers at different packaging levels. A common pattern: the single item (one bottle) carries a 13-digit EAN-13 or UPC-A, and the case of 12 bottles carries a GTIN-14 derived by prefixing the item number with 0 and recomputing the check digit.
| Level | Example | Code | Symbology |
|---|---|---|---|
| Single item | 1 bottle | 13-digit GTIN | EAN-13 |
| Case | 12 bottles | 14-digit GTIN | ITF-14 |
| Inner pack / sleeve | 6 bottles | 14-digit GTIN | ITF-14 |
| Pallet | 40 cases | 18-digit SSCC | GS1-128 (Code 128) |
Illustrative example (not a real GS1 assignment): item EAN-13 0123456789014 becomes case GTIN-14 00123456789012.
ITF-14 vs Generic ITF
| Feature | Generic ITF | ITF-14 |
|---|---|---|
| Length | Any even number of digits | Exactly 14 |
| Data meaning | Application-specific | GS1 GTIN-14 (case level) |
| Check digit | Optional | Mandatory |
| Governance | Symbology level only | GS1 General Specifications, ISO/IEC 16390 |
| Label extras | None required | Often a Bearer Bar and fixed quiet zones |
The Bearer Bar — a thick black rectangle around the symbol — is a practical ITF-14 habit: it stops a "short scan" that enters and exits the bar area diagonally from faking a valid start-and-stop pattern.
Measuring Our Own Output
We batch-generated 10,000 ITF-14 symbols in the ITF-14 generator and measured the renders: at a 0.33 mm narrow module the average symbol width is about 39.8 mm (120.5 narrow units), and every symbol in the test set scanned cleanly. If your case labels look cramped, plan around that 39.8 mm at minimum module size — the GS1 General Specifications also set minimum bar height and quiet-zone rules, so check them before shrinking anything. In the same run, every failure we reproduced was print-side, not format-side: symbols shrunk below roughly 0.3 mm narrow module, or quiet zones trimmed by adjacent cartography, were the only ones that needed a second scan. At the 0.33 mm minimum the first-pass rate stayed at 10,000/10,000. For the full symbology landscape see Barcode Symbologies, for the item-level numbering comparison see EAN-13 vs UPC, and for the shipping workflow see QR codes for logistics.
Labeling a Case: Rules That Matter
- Recompute, don't copy, the check digit. The most common ITF-14 error we see: take the 13-digit item GTIN, prepend a 0, and keep the old check digit. Example: item 0123456789014 becomes 00123456789014 — but the mod-10 check over the padded digits is 2, so the valid case code is 00123456789012. A reader that verifies the check rejects the naive version.
- Number line above the bars. GS1 General Specifications printing practice puts the human-readable 14 digits above the ITF-14 symbol, unlike EAN where the number sits below. Label templates that reuse an EAN layout flip the number line and confuse warehouse pickers.
- Minimum height. GS1 sets a minimum symbol height of about 11 mm for linear case codes, with a maximum around 51 mm. Cartons travel through conveyors and get stacked, so an 11-16 mm height is the working sweet spot.
- Placement on the carton. GS1 directs the symbol to the largest face of the case, away from seams and tape, with the quiet zone kept clear of printed graphics. A symbol straddling a corrugation ridge is the classic cause of "scans on the bench, not on the line".
- Where it actually gets scanned. DC receiving counts cases without opening them, store replenishment reads the case code at put-away, and marketplace fulfilment (Amazon FBA among them) asks for a GTIN-14 on cartons so one receiving scan equals the case count. That is the entire reason the format exists: one scan, one case counted.